High-Quality Quarter-Turn, Spanner & Barrel Locks
Cam H = 45mm ZP STEEL
Card Number. 1082.76
Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated, has a stepped shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).
Features
- Zinc Plated Steel Finish
- 53mm Length, 19mm Width, 45mm Step
- 8mm Square Drive
This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.
Hooked Cam
Card Number. 1082.84
Cams are used in a wide range of locks to secure a lock into its intended location. This cam is zinc plated and is hooked in shape.
Features
- Zinc Plated Steel Finish
- 8mm Square Drive
This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.
Finger Pull Black
Card Number. 1082.50
Finger Pulls are used in conjunction with quarter turn locks to use the lock as leverage to open a compartment. This finger pull is made from black polyamide plastic, and suits 28mm diameter locks.
Features
- Black Polyamide Plastic Finish
- Suits 28mm Diameter Locks
This finger pull is suited to a wide range of quarter turn locks stocked by ovesco.
Finger Pull Black
Card Number. 1082.51
Finger Pulls are used in conjunction with quarter turn locks to use the lock as leverage to open a compartment. This finger pull is made from black polyamide plastic, and suits 32mm diameter locks.
Features
- Black Polyamide Plastic Finish
- Suits 32mm Diameter Locks
This finger pull is suited to a wide range of quarter turn locks stocked by ovesco.
DIRAK 1/4 Turn 8mm SQ S/S
Card Number. 1081.40
Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is lockable using an 8mm square drive key (1081.52), can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 6mm.
This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)
Features
- Grade 316 Stainless Steel Finish
- 8mm Square Drive
- Key Sold Seperately (1081.52)
- 26mm Maximum Grip
- 6mm Maximum Panel Thickness
- 1 Way Locking
For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range
This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.
DIRAK 1/4 Turn 8mm SQ 316 S/S
Card Number. 1081.41
Quarter Turn Locks are commonly used where simple 1 point locking systems are required. This lock is lockable using an 8mm square drive key (1081.52), can operate through an angle of 90° (quarter turn), and can be installed into panels with a maximum thickness of 20mm.
This lock suits applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape)
Features
- Grade 316 Stainless Steel Finish
- 8mm Square Drive
- Key Sold Seperately (1081.52)
- 38mm Maximum Grip
- 20mm Maximum Panel Thickness
- 1 Way Locking
For alternative cam lock options, ovesco also stocks the Southco E5 Cam Latch range
This lock is commonly used for electrical switchboards, HVAC, medical and general cabinets, tool boxes and service vehicles. It is also used in canopies, mining and marine applications, motor homes and camper trailers.
Cam H = 18mm Stainless Steel
Card Number. 1082.92
Cams are used in a wide range of locks to secure a lock into its intended location. This cam is made from stainless steel, has a straight offset shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).
Features
- Stainless Steel Finish
- 53mm Length, 19mm Width, 18mm Offset
- 8mm Square Drive
This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.
Cam H = 26mm S/Steel
Card Number. 1082.78
Cams are used in a wide range of locks to secure a lock into its intended location. This cam is made from stainless steel, has a stepped shape, and is suited to applications where a slide compression fit is required (i.e. where lock is abutting pinchweld or foam tape).
Features
- Stainless Steel Finish
- 53mm Length, 19mm Width, 26mm Step
- 8mm Square Drive
This cam is suited to a wide range of swing handle locks, quarter turn locks, spanner locks and cam latches.
7mm Square Drive Key
Card Number. 1081.50
This square drive key is used to unlock locks that have a 7mm square drive bit.
Features
- Chrome Finish
- Suits 7mm Square Drive Bits
ovesco sell a wide range of locks that suit this key
8mm Triangle Drive Key
Card Number. 1081.51
This triangle drive key is used to unlock locks that have an 8mm triangle drive bit.
Features
- Chrome Finish
- Suits 8mm Triangle Drive Bits
ovesco sell a wide range of locks that suit this key
8mm Square Drive Key
Card Number. 1081.52
This square drive key is used to unlock locks that have an 8mm square drive bit.
Features
- Chrome Finish
- Suits 8mm Square Drive Bits
ovesco sell a wide range of locks that suit this key
3mm Double Bit Drive Key
Card Number. 1081.54
This double bit drive key is used to unlock locks that have a 3mm double bit drive.
Features
- Chrome Finish
- Suits 3mm Double Bit Drive
ovesco sell a wide range of locks that suit this key
Simple, strong, reliable quarter and half-turn barrel locks
Quarter and half turn locks are small, basic locks that are ideal for situations where single-point security is needed. For example, you’ll find these key-lockable locks useful for toolboxes and equipment cases that need to be accessed quickly yet also stored securely.
Ovesco stocks a wide selection of half and quarter-turn locks with different barrel sizes; you’ll be able to find one that fits your lid, door or cap exactly. Several of our designs also feature wing knobs for easy gripping, and we also offer a range of compatible cams that can be used to position your barrel locks more precisely. You’ll also find a range of bit drive keys that can be used in place of standard keys.
Browse our full range to discover their specs, including finishes, grip and panel thickness tolerances.
Why choose us?
Australia’s leading supplier of hardware
Ovesco has been built on selection and service. We take pride in being able to offer product solutions for any issue in the industrial and transport sectors. Better yet, we have the experience to offer qualified advice across the broad selection of items we supply. We know what it takes to meet your expectations.
4000 items
We have over 4000 high quality product lines available in hundreds of different categories.
20 years
We have over 20 years of experience servicing businesses in industrial and transport.
Expert Knowledge
How we meet customer expectations
Our staff are highly experienced tradespeople from an array of fields and offer reliable advice for all solutions in the industrial and transport sectors. Contact us by phone or send through an email enquiry and one of our qualified staff will contact you back to assist with the right solution.
FAQs
What is a barrel lock?
A barrel lock consists of a cylindrical barrel-shaped plug containing a series of pins that align with a corresponding set of driver pins when the correct key is inserted and turned. This alignment allows the plug to rotate, retracting or extending a bolt or latch to secure or release the closure.
How to replace a barrel lock?
What are barrel locks commonly used for?
Have a question?
Contact us
Want to know more about our products? Leave a message and a member of our team will be in touch.
